| Skygrinder 1 |
| |
Mill tool - Grind machine skygrinder 1
Simply high-exact - individual tools manufacture, engraving tools and cutting tools manufacture at high speed and quality. If it's about the grind more individually high-precise or the finest milling tools, or complex edge forms must be fast produced, or should be regrinded in no time, helps you our skygrinder. You can grind miillers and straight-interlocked radius drills and forehead edges of end millers again razor-sharp. Thanks of the brilliant construction with a practical design and the almost boundless set possibilities belongs skygrinder to the indispensable basic equipment of your company. The big achievement spectrum, skygrinder is based on the universal swing and set possibilities, these are the basis for the attainable form variety of the tools. All operating elements are right a little bit accessible in the front and and the side of the machine. The partial head bearer is stored along adjustably and tiltable in two level vertical to each other adaptably. The core of the machine - the partial head - can accept tools up to Ø 25.0 mm and be adjusted to grid of external-concentric radii crosswise to the vertical swinging axis. With the carefully stored and free of play prestressed grinding spindle can be grinded tools free of vibration and without stepping marks.
The careful sealing against abrasive dust and soiling guarantees many years' use without quality loss. You do the surfacers of the grinding wheel simply and clean. The standard truing equipment is integrated into the grinding wheel-protection bonnet.
| front view:
side view:
| | | | | main characteristics | | model | Mill tool - Grind machine Skygrinder 1 | engine power
| 0,5 KW | | engine speed | 3600 U/min, 2 levels | | spindle speed | 5200 U/min, 2 levels | tool admission | tool Ø with clamping devices | 0,5 up to 25 mm | | grinding wheel max. | 100 x 50 x 20mm | attitudes of the tool admission | lateral shift | 10 mm | along shift | 40 mm | | Scope of supply of clamping devices | 1, 2, 2,5, 3, 5, 7, 9, 18, 20, 25 mm und 1/8 ", 3/16", 1/4 ", 5/16", 3/8 ", 1/2", 5/8" | | max. pointedly angle | 0 ~ 180° | max. relief angle | 0 ~ 45° | | max. negativ angle | 0 ~ 26 ° | | Power supply | 220V / 230V AC 50Hz | | Power consumption | 0,6kW | | physical characteristics | machine dimensions
| 550 x 470 x 450 mm | | weight | 45 kg |
|
|
| |
| Additional information |
| |
|
| |
| Please contact our sales assistants for more information. |
| |
| For prices please click here. |
| |
|
|
